Already know what you're looking for?
bandings, boxmaking, crafting, inlay, specialty items, turnings
Longhi (Gambeya spp.) is a well-priced, light-colored African hardwood from the tropical forests of West and Central Africa. It has working properties similar to its better-known cousin, Anegre.Its color ranges from greyish-white to beige and pinkish-brown, darkening slightly with age and light exposure. The sapwood is hard to tell apart. The grain is usually straight, sometimes interlocked, and the texture fine to medium-fine, with occasional mottled or subtle tiger-stripe figure that can be very attractive.It needs careful drying to avoid fungal staining. Once dry, it's moderately durable and stable. It machines, glues and finishes well, and its light color takes stain evenly if you want a different look.Longhi has a good strength-to-weight ratio, which makes it a popular choice for flooring and decking, as well as cabinetry, furniture, interior joinery and veneer. It's a practical, affordable option when you want a light-colored hardwood that's easy to work.
cabinetry, decking, flooring, furniture
Red Alder (Alnus rubra) is the most abundant hardwood in the US Pacific Northwest, where it has long been used for furniture and cabinetry. It's also been a popular electric guitar body wood since the instrument first went into mass production in the 1950s.The color ranges from light tan to reddish-brown. It's light and soft for a hardwood, which makes it very easy to work, and it glues and finishes well. Many cabinetmakers compare its easy-going nature to Black Cherry.Alder is usually sold in two grades, knotty and clear, with clear preferred for furniture and cabinets. The surface dents easily until it's finished, so a hard finish such as lacquer is a good idea. It isn't durable outdoors, so it's best kept to indoor projects such as cabinetry, millwork and instruments.
cabinetry, lutherie, millwork, musical Instruments
boatbuilding, cabinetry, carpentry, construction, veneer
Spalted Maple isn't a species. It's maple with black lines and streaks caused by fungi in the early stages of decay, often in logs that have lain on the forest floor for a while before being sawn.The spalting creates random, dramatic patterns of black zone lines, sometimes with patches of pink, grey or cream, so every board is unique. Spalting can't be planned, so every piece is a one-off. The process is stopped once the wood is kiln-dried.Some pieces may have softer areas where the spalting is heavier, so check your stock, use sharp tools, and consider a sanding sealer or stabilizing before finishing. Sand with fine grits to avoid smearing the dark lines. Wear a dust mask, as fungal spores add to the dust.Spalted Maple is a favorite for turnings, bowls, boxes, guitar tops, furniture accents, carving and specialty pieces. For another spalted wood, see Spalted Tamarind, and for maple with beetle-trail streaks, see Ambrosia Maple.
cabinetry, carving, flooring, furniture, specialty items, turnings, veneer
Figured Black Walnut (Juglans nigra) is American Black Walnut with striking figure across the grain, such as curl, crotch or wavy figure. It's the walnut that makers save for their best work.Black Walnut is prized for its deep chocolate color, often with red or purple streaks, a fine texture and a warm luster. Figure adds shimmer and depth that a plain board can't match, and the effect shifts as you move around the piece.It's strong for its weight, stable, shock-resistant and durable, and it's a pleasure to work. Take light passes on figured areas to avoid tear-out, or use a scraper or card scraper for the final surface. An oil finish really brings the figure to life, and a clear topcoat over oil keeps that depth while adding protection.Figured boards are the most sought-after walnut, and the best pieces are limited in supply. They're ideal for showpiece furniture, tabletops, gun stocks, boxes, guitar backs, turnings and veneer. See also plain American Black Walnut and English Walnut.
cabinetry, furniture, gun stocks, interior panelling, specialty items, turnings, veneer
Sipo (Entandrophragma utile), also called Utile or Sipo Mahogany, is a West and Central African wood from the mahogany family. It's considered the closest in looks to Genuine Mahogany, though it isn't a true mahogany.The heartwood is a rich reddish-brown that deepens with age. Its interlocked grain gives quartersawn boards a striking light-and-dark striped look, which can be stunning in more chatoyant pieces. It's similar to its cousin Sapele, but a little more porous and richer in color, with a more even ribbon.It's easier to work than African Mahogany, with less tear-out, and its hardness falls between that and Genuine Mahogany. It glues and finishes well and is moderately durable. Like many such woods, it can stain when in contact with iron.Its modest price has made Sipo a highly regarded mahogany substitute for furniture, cabinetry, windows and doors, boatbuilding, guitar necks and bodies, carving, turnings and veneer.
boatbuilding, cabinetry, carving, furniture, turnings, veneer
Engelmann Spruce (Picea engelmannii) grows high in the mountains of western North America, from British Columbia and Alberta down through the Rockies. It's prized by acoustic guitar makers for soundboards, thanks to its resonance and quick, responsive tone.The wood is light off-white to cream, a touch paler than Sitka, with straight grain and a fine, even texture. It's generally easy to work with hand and power tools, though it can blotch when stained, so a sealer coat or a clear finish is the safer choice.What makes it special for instruments is its stiffness-to-weight ratio. Construction-grade spruce is plentiful and inexpensive, but small knots are common, so clear, tight-grained, quartersawn billets come from slow-grown, high-altitude trees and are priced accordingly.Sitka Spruce is more widely used for guitar tops, but many builders prefer Engelmann for fingerstyle and classical guitars, where its warm, open sound and lighter weight really shine. It's also used for harps, mandolins, violin family tops and other instruments. For another classic soundboard wood, see Western Red Cedar.
construction, harps, lutherie, musical Instruments
European Sycamore (Acer pseudoplatanus), also called French Sycamore, is a true maple, not the American sycamore or plane tree. As with other maples, the pale sapwood is the part that's prized.The sapwood ranges from almost pure white to light cream, sometimes tinted golden or muted red, while the heartwood is a medium to dark reddish-brown. The grain is usually straight, sometimes wavy, and figured boards with strong curl or flame can be truly dramatic.Its fine, even texture makes it easy to work by hand or machine, though like other maples it can burn with dull cutters or slow feed rates. It turns, glues and finishes well, with a good natural luster, and its pale color takes stains and dyes evenly.European Sycamore has been the traditional wood for the backs, sides and necks of violins, violas, cellos and basses for centuries, valued for its resonance at a moderate weight, which is why it's usually sold quartersawn. It's also used for furniture, cabinetry, flooring, turnings and veneer. For a North American cousin, see Curly Hard Maple.
cabinetry, flooring, furniture, joinery, millwork, musical Instruments, specialty items, turnings, utility lumber, veneer
Burmese Teak (Tectona grandis), often called Genuine Teak, is one of the world's best-known woods. Teak from Myanmar has long been regarded as the benchmark, and it's prized less for its looks than for its toughness, rot resistance and durability.The heartwood is light to medium brown, with a tint from muted gold to pale red, and it darkens to a warm, rich brown with age. The sapwood is pale white to yellowish-brown. The grain is usually straight, sometimes wavy or interlocked, with a coarse, slightly oily feel.Its high natural oil content makes it very resistant to weather, water and insects, and it's exceptionally stable. It generally works well, but its silica content dulls blades quickly, so carbide tooling helps. The oils can affect glue joints and some finishes, so wipe surfaces with a solvent first.Teak has always done well around water, in boats, ships and docks, and steady demand keeps its price high. It's the classic wood for boatbuilding, decking and outdoor furniture, and it's also used for flooring, carving, turnings and veneer. See also Zambezi Teak.
boatbuilding, carving, construction, flooring, furniture, turnings, veneer
African Walnut (Lovoa trichilioides), also called Dibetou or Congowood, grows in the tropical forests of West and Central Africa. It isn't a true walnut but a member of the mahogany family, though it shares many of walnut's qualities.The heartwood ranges from golden brown to reddish-brown, often with darker streaks, and it deepens to richer brown tones with age. The narrow sapwood is grey to beige. Quartersawn boards can show a ribbon stripe much like Sapele, and figured pieces turn up fairly often.The grain is straight or slightly interlocked, with a fine to medium, consistent texture and a fine natural luster. It works, turns, glues and finishes well, though sharp tools help avoid tear-out on interlocked boards. It's lighter in weight than American walnut, reasonably stable and moderately durable.African Walnut makes a handsome, more affordable alternative to true walnut for many projects. It's used for furniture, cabinetry, paneling, flooring, gun stocks, carving, boatbuilding and veneer. See also American Black Walnut.
boatbuilding, cabinetry, carving, flooring, furniture, gun stocks, joinery, paneling, specialty items, turnings, veneer
American Black Walnut (Juglans nigra) is one of America's most popular and prized hardwoods, and it's been a favorite of fine furniture makers for centuries. The trees are valued as much for their nuts as for their lumber.It's known for its deep chocolate color, often with red or purple streaks, along with straight to irregular grain, a fine texture and a warm luster. The sapwood is pale cream, and steamed lumber evens out the color, while air-dried boards keep a richer mix of tones.It's strong for its weight, stable once dry, shock-resistant and durable, and its moderate density makes it a pleasure to work. It planes, carves, turns and glues easily and takes an oil finish beautifully, which is why it's long been the top choice for gun stocks.Walnut grows mainly near rivers and streams in the eastern and central US and into southern Ontario. Supply is steady but demand is always strong, making it a premium domestic hardwood. It's used for furniture, cabinetry, gun stocks, paneling, turnings and veneer. For figured stock, see Figured Black Walnut.
cabinetry, furniture, gun stocks, interior panelling, specialty items, turnings, veneer
Yellowheart (Euxylophora paraensis), also called Pau Amarelo or Brazilian Satinwood, was once one of the most popular yellow woods around. True Yellowheart has now become almost impossible to find.The tree grows only in a small part of the Brazilian Amazon, mostly in Pará and Maranhão, where it occurs naturally at low densities. Decades of selective logging, along with forest clearing for cattle pasture and farming, are thought to have cut its wild population by half or more over the past 60 years. In 2014 Brazil added it to its official list of threatened species, which bans cutting, transporting and selling wild trees, and supply to the US has all but dried up. Much of the “Yellowheart” sold today is actually a different species.The color ranges from pale yellow to bright yellow and gold, and premium boards show a satiny, shimmering figure. It's fine-textured, durable and easy to work, and it finishes beautifully.We still have a small amount of legacy stock, bought before the ban, and once it's gone we won't be able to replace it. For the same golden look in a wood that's readily available, see Yellow Rosa or East Indian Satinwood.
boatbuilding, cabinetry, carving, flooring, furniture, handles, inlay, musical Instruments, trim, turnings, veneer
Yellowwood (Podocarpus latifolius) is the national tree of South Africa, and its light, even-grained wood has been used there for hundreds of years, from railway sleepers and building timbers to floors and furniture. The slow-growing trees can reach around 100 feet in moist mountain forests.The heartwood is pale yellowish-brown, sometimes with reddish streaks, and hard to tell apart from the sapwood. The grain is usually straight, occasionally wavy, with a fine, even texture and a nice natural luster.It's tough, stable and easy to work with hand and power tools, and it planes, glues and finishes well. It's fairly light in weight, which makes it pleasant to handle on larger projects, and it takes stains and clear finishes evenly.Old Cape Dutch homes are famous for their yellowwood floors, ceilings and furniture, and antique yellowwood pieces are highly collectible in South Africa. It's still very popular in southern Africa for indoor carpentry and floors. Yellowwood is a lovely choice for boxes, fine furniture and interior work. See also Stinkwood, its traditional partner in Cape furniture.
boxmaking, fine furniture
African Padauk (Pterocarpus soyauxii) is a strong, very stable hardwood from Central and West Africa known for its bold color, and it's a reasonably priced exotic.Freshly cut, it's a vivid orange-red, deepening over time to a robust reddish-brown. Colors can range from bright orange to muted burgundy, with grain lines in brick red or purple. The best boards have long, straight grain with ribbon figure and deep chatoyance. A finish with UV protection helps keep the color bright.The grain is mostly straight, sometimes interlocked, with large pores and a texture similar to African Mahogany. It works and finishes very well, though its fine red dust gets everywhere and can irritate, so use good extraction. The trees grow over 100 feet tall, so long, wide boards are available.Padauk is durable and resistant to insects and termites, and it's been used outdoors in Africa for centuries. It's used for furniture, flooring, trim, handles, turnings, marimba and xylophone bars, and accents. For a related wood, see Kiaat.
flooring, furniture, handles, specialty items, trim, turnings, utility lumber, veneer
cabinetry, carving, furniture, inlay, millwork, musical Instruments, turnings, veneer
Yellow Poplar (Liriodendron tulipifera), also called Tulip Poplar or American Tulipwood, comes from the tallest hardwood tree in the eastern US, and it's one of the lightest hardwoods. Despite the name, it isn't a true poplar: its tulip-shaped flowers give it its other names.The heartwood is a light cream color, often with grey or green mineral streaks, and the sapwood is ivory to white. Especially colorful boards, with streaks running from red and purple to green and black, are known as Rainbow Poplar. The green tones darken to brown with light exposure.The grain is straight and uniform and the texture medium, so it's very easy to work, and it glues and finishes well when finely sanded. It takes paint better than almost any other hardwood, which makes it the go-to choice for painted work. It's moderately durable and very affordable.It's used for paneling, painted furniture, trim and moulding, drawer sides, crafts, carving, instruments and veneer, and it's a popular electric guitar body wood. For another light, easy-working hardwood, see Basswood.
crafting, lutherie, musical Instruments, paneling, utility lumber, veneer
African Rosewood (Guibourtia coleosperma), also called False Mopane or Rhodesian Copalwood, grows in the dry woodlands of southern Africa. It's in the same genus as Bubinga, which is why Bubinga is often mistakenly called African Rosewood. It isn't a true rosewood, but it often has a similar look.The heartwood ranges from pink to reddish-brown with purple or red streaks. The grain is generally straight, sometimes interlocked, with a moderately fine texture and a good luster.It works well, though it can blunt tools, and it glues and finishes well. It needs slow, careful drying to avoid warping and cracking, but it's durable and stable once dry, which makes it suitable for outdoor as well as indoor use.The tree has many traditional uses in Africa: its seeds are eaten and pressed for oil, and its bark yields a red dye used to stain furniture. As lumber, it's used for flooring, furniture, decking, millwork, turnings and veneer.
boatbuilding, decking, flooring, furniture, millwork, specialty items, turnings, veneer
cabinetry, furniture, specialty items, turnings, veneer
Slavonian Oak (Quercus robur) is European Oak from Slavonia, a region of eastern Croatia whose slow-grown forests produce some of Europe's finest oak. It's rarely seen in the US.It's best known for wine barrels, where its tight grain is said to mellow the taste and texture of the wine, and it's a long-time favorite of Italian winemakers. The heartwood is light to medium brown, sometimes with a greenish hue. The grain is mostly straight, sometimes interlocked or irregular, and the texture coarse.Quartersawn boards show dramatic ray fleck and are the most stable. It's tough and durable, steam-bends well, and is easy to work, gluing, staining and finishing well. Like all oaks, it can stain dark when in contact with iron.Besides barrels, it's used for fine furniture, cabinetry, flooring, boatbuilding and veneer, and its renown in the wine trade dates back centuries. See also White Oak and Bog Oak, the same species preserved in a peat bog.
boatbuilding, cabinetry, flooring, furniture, veneer,
White Oak (Quercus alba) has long been one of America's preeminent hardwoods. It grows across the central and eastern US, and the trees can live for hundreds of years. One in New Jersey is estimated to be over 600 years old.The heartwood ranges from light golden tan to light and medium brown. The grain is straight, and quartersawn boards show the ray fleck oak is famous for. Its pores are plugged with growths called tyloses, which make it watertight, so it's the classic wood for whiskey and wine barrels.It's the most durable of the oaks and steam-bends well, which is why it has been used in boatbuilding for centuries. Despite its coarse texture, it works, glues, stains and finishes very well. It shrinks a lot, so quartersawn stock gives the most stable results. Like all oaks, it can stain when in contact with iron.White Oak is used for furniture, Mission and Arts and Crafts pieces, cabinetry, flooring, boats, barrels and veneer. For a more affordable oak, see Red Oak.
boatbuilding, cabinetry, carpentry, flooring, furniture, veneer,
Ambrosia Maple isn't a species. It's maple, most often Red or Sugar Maple, marked with colorful streaks and small holes left by the ambrosia beetle. It's sometimes called Wormy Maple.The beetle burrows into the tree and carries a fungus with it, which feeds its young. As the fungus spreads through the sap, it stains the wood with streaks, mostly blue-grey and sometimes greenish or brown, around the small tunnels. The beetles prefer freshly cut, drying wood and don't return once it's been kiln-dried, so the holes are no cause for concern.The result is a darker, more characterful surface than plain maple, with the same high luster and often other maple figure too, so every board is unique. It works as easily as any maple. Fill the beetle holes with epoxy or leave them as they are, and go slowly with high-speed tools, as maple can burn.Ambrosia Maple isn't durable outdoors, but it's stable enough for furniture, tabletops, guitars, cutting boards, turnings, crafts and veneer. For another naturally marked maple, see Spalted Maple.
crafting, furniture, lutherie, specialty items, turnings, veneer
cabinetry, carving, flooring, furniture, turnings, veneer
Red Oak (Quercus rubra), also called Northern Red Oak, grows across the eastern US and Canada. It's one of America's most popular hardwoods thanks to its strength, hardness and moderate price.The heartwood is light brown with a reddish tint, and the sapwood can be hard to tell apart. The grain is usually straight, with a coarse texture and large, open pores, and quartersawn boards show the ray fleck oaks are known for.It works, glues and finishes well, and it takes stain evenly, which makes it easy to match existing furniture. It shrinks a fair amount as it dries, so quartersawn stock is the most stable choice. Its open pores let water through, so it isn't durable outdoors and isn't suitable for boats.Red Oak is a favorite with furniture builders and cabinetmakers and has long been a staple of American interiors, from floors and trim to kitchen cabinets. It's also used for handles, stair parts and veneer. For a more durable, water-resistant oak, see White Oak.
cabinetry, flooring, furniture, handles, utility lumber, veneer
flooring, handles, utility lumber
Jelutong (Dyera costulata) is a light-colored Southeast Asian wood from Malaysia and Indonesia. Its trees were once tapped for latex used in chewing gum, before gum makers switched to synthetics.The wood is pale cream to straw-colored, with a generally straight grain and a fine, even texture. You may see small slit-like latex canals in some boards, a reminder of the tree's history.It's a favorite with carvers. The low density makes it exceptionally easy to work, and it's dimensionally stable and takes stain and finish well, with a subtle luster. It holds detail better than you might expect for such a soft wood, and it sands smoothly. It isn't durable outdoors, so keep it inside.The trees grow tall, so wide, clear boards are common, though lumber can be hard to find in the US. In Southeast Asia it's used much like Basswood: for carving, pattern-making, models, picture frames, drawing boards and utility work. It's an excellent choice for beginners learning to carve.
carving, specialty items, utility lumber
Kiaat (Pterocarpus angolensis), also called Mukwa, Muninga or Bloodwood in parts of Africa, is a close relative of African Padauk. It grows across the woodlands of southern and central Africa and has been used there for centuries.
The heartwood ranges from light golden brown to medium brown with a reddish or purplish tint, often with attractive darker streaks. The grain can be straight, wavy or interlocked, and the texture fine to medium with a nice luster. When the tree is cut, it bleeds a red sap, which gave rise to some of its local names.
It's lighter than Padauk but strong for its weight, very stable with extremely low shrinkage, and resistant to insects and termites. It works easily, and it turns, glues and finishes well, making it a pleasure in the workshop.
The trees are fairly small, so large boards are rare and it's seldom seen in the US. In southern Africa, Kiaat is a favorite for fine furniture and was traditionally used for dugout canoes and paddles. It's a versatile wood for furniture, boatbuilding, turnings, carving, veneer and specialty pieces.
boatbuilding, furniture, specialty items, turnings, veneer
Koa (Acacia koa) is one of Hawaii's most beautiful native hardwoods and grows only on the Hawaiian Islands. It's sometimes compared to mahogany in appearance, and it holds a special place in Hawaiian culture, traditionally used for canoes and surfboards.It's generally medium to reddish brown, though color varies a lot, from golden to deep chocolate. Figured boards with strong curl and chatoyance are highly prized and can seem to glow under finish.It's quite stable and fairly easy to work, except where the grain is highly figured or interlocked, where sharp tools and light passes help. It glues and finishes well, and a clear finish brings out its depth.Koa is a very popular instrument wood with a rich, warm tone, used widely for guitar backs and sides, tops and ukuleles. It's also used for fine furniture, gun stocks, turnings, boxes, veneer and specialty pieces. Supply is limited, and highly figured boards command a premium. For a similar look at a friendlier price, see Australian Blackwood.
gun stocks, specialty items, turnings, veneer
furniture, turnings, veneer
Himalayan Cedar (Cedrus deodara), or Deodar, is a true cedar native to the western Himalayas, where it's an important timber tree in Pakistan, Kashmir and northwestern India. Its name comes from the Sanskrit “devadaru,” meaning “timber of the gods,” and it's a sacred tree in Hinduism.Our Himalayan Cedar was grown in the Eastern Cape of South Africa, a long way from its mountain home. Deodar was introduced to many parts of the world in the 1800s, and it has done well in South Africa's climate.The heartwood ranges from light tan to light brown with a reddish tint. The grain is usually straight and the texture fine and even, with a high natural luster. It's strong for its weight and has a reputation for excellent working properties: it cuts, planes and finishes cleanly. The wood is prized for its durability, pleasant fragrance and resistance to insects, and the trees also yield a fragrant oil with insect-repelling and anti-fungal properties.In its native regions it's used for construction, carpentry, temple building and furniture. It suits furniture, joinery, boxes, closet linings and general woodworking anywhere you want a light, fragrant, durable softwood. See also Aromatic Cedar.
carpentry, construction, furniture, joinery
Japanese Cedar (Cryptomeria japonica), known in Japan as Sugi, is the country's national tree. It's planted at temples and sacred sites across Japan, and some ancient trees are famous landmarks in their own right. It's prized for its scented, strong but lightweight timber, and it's been planted well beyond Japan, including in South Africa.The wood is reddish-pink to light brown, straight-grained and medium-textured, often with a pleasant, clean fragrance. It's strong for its weight and resists water well, which is why it has been used in Japanese boat and ship building for centuries.Knots are fairly common, as you'd expect from a cedar, but otherwise it works very easily with hand and power tools, and it glues, stains and finishes well. It's soft, so it dents more easily than hardwoods.Japanese Cedar is used for construction, interior paneling, furniture, boatbuilding, carving and turnings, and it's a traditional choice for Japanese architecture and woodwork. Our Japanese Cedar was grown in South Africa, where the species was introduced and does well. If you like light, fragrant softwoods, see also Western Red Cedar.
boatbuilding, carving, construction, furniture, turnings
Spanish Cedar (Cedrela odorata) isn't a true cedar at all. It belongs to the mahogany family, and it shares many of that family's best qualities: it's light, pleasantly aromatic and one of the easiest hardwoods to work.The heartwood ranges from a soft pinkish-brown to reddish-brown and darkens nicely with age. The grain is straight and the texture fine, so it planes, carves and sands cleanly, and it glues and finishes well. Most Spanish Cedar on the US market is plantation-grown, which is usually a little lighter in weight and color than forest-grown wood.It's best known for cigar boxes and humidors, where its scent suits tobacco and it stays stable as humidity changes. Light, stable and easy to carve, it's also the traditional wood for classical and flamenco guitar necks, and it's used in boatbuilding, cabinetry and veneer. Related woods in the mahogany family include Genuine Mahogany, Sapele and Sipo.
boatbuilding, cabinetry, humidors, musical Instruments, veneer
Western Red Cedar (Thuja plicata) grows in the Pacific Northwest of North America and is one of the most beautiful and useful softwoods in the world. Its colors range from mellow amber to reddish cinnamon and sienna brown, often in the same board.The grain is straight and the texture fine and even, with a satin-like luster. It's light, yet remarkably stable for its weight, and it has a pleasant, spicy scent when cut. Left outdoors unfinished, it weathers to a soft silver grey.It's naturally durable outdoors, which makes it a go-to for siding, cladding, decking, fencing and garden projects. It's easy to work by hand or machine, and it glues and finishes well, though it's soft and dents easily, so handle finished pieces with care.Western Red Cedar is wonderfully versatile, used for everything from home construction to clear, quartersawn soundboards for classical and acoustic guitars, where its warm, responsive tone is highly valued. For another classic soundboard wood, see Engelmann Spruce.
exterior cladding
Black Cherry (Prunus serotina) is one of America's most important hardwoods and a long-time favorite for fine furniture. It grows across the eastern United States, with some of the finest timber coming from Pennsylvania and New York.Freshly cut, it's tan to light brown with a pink or red tint, and it ages to the rich reddish-brown (russet) that stains on other woods try to imitate. That color change happens quickly with light exposure. The sapwood is pale yellow, and small dark gum flecks and pith marks are part of its natural character.The grain is straight to irregular, the texture fine and even, and the density moderate. It's one of the most cooperative, user-friendly hardwoods around: easy to work, strong for its weight, stable and durable. It can blotch when stained, but with color like this there's rarely a reason to stain it. Go slowly with high-speed tools, as it can burn.Cherry is used for fine furniture, cabinetry, millwork, flooring, turnings and veneer, and occasionally for guitar necks and bodies. For figured stock, see Curly Cherry.
cabinetry, fine furniture, flooring, millwork, specialty items, turnings, veneer
boatbuilding, construction, veneer
Butternut (Juglans cinerea) is often called White Walnut, and it's a true member of the walnut family. It grows across the eastern United States and southeastern Canada, and it's much lighter and softer than its walnut cousins.The color is a pleasant light tan with a soft, pastel look, and some boards carry a pink or reddish tint. The grain is mostly straight with a medium to coarse texture, and the tree's fluted trunk can produce irregular, eye-catching figure. It looks a lot like a pale walnut, which makes it a handsome choice for furniture with a softer, lighter tone.Its low density makes it very easy to work by hand or machine, and like other walnuts it turns, glues, stains and finishes well. Despite being soft it's fairly durable, though like all walnuts it can be attacked by insects, and it dents more easily than harder woods.Butternut is a favorite with carvers and is also used for furniture, paneling, boxes, crafts and veneer. Many North American trees have been lost to butternut canker, a fungal disease, so good lumber is becoming harder to find. For a darker walnut, see American Black Walnut.
boxmaking, carving, crafting, furniture, veneer
boatbuilding, boxmaking, carving, construction, decking, flooring, outdoor furniture
cabinetry, furniture, veneer
carving, fencing, musical Instruments, utility lumber, veneer
American Beech (Fagus grandifolia) is a common, reasonably priced hardwood with a pale cream color, often tinted pink or light reddish-brown.The grain is usually straight, sometimes wavy, and the texture medium. It cuts, turns, glues and finishes very well, with a moderate natural luster, and it steam-bends nicely. It's similar to Maple in hardness and density, so it's sometimes used in its place. It can move with changes in humidity, and it isn't durable outdoors.Flat-sawn boards are fairly plain and mostly go to utility work, while quartersawn pieces show an attractive silvery fleck that suits furniture and instruments. Steamed beech veneer takes on a pleasant golden brown.Beech is used for furniture, flooring, turnings and specialty items. See also European Beech.
flooring, furniture, specialty items, turnings, veneer
European Beech (Fagus sylvatica) is one of the most popular and commercially important hardwoods in Europe, thanks to its large supply and modest price. It's slightly harder than its American cousin.The wood is pale cream, often with a pink or light reddish-brown tint. The grain is straight and the texture medium, and it machines, turns, glues and finishes easily. Large trees yield long, wide boards.It's strong, tough and steam-bends very well, which is why it has been used in European boatbuilding for centuries. Like all beech it isn't durable outdoors and can move in service, so well-dried, quartersawn stock is the best choice where stability matters.European Beech is used for furniture, cabinetry, flooring, turnings, instruments and veneer. See also American Beech.
boatbuilding, cabinetry, flooring, furniture, musical Instruments, turnings, veneer
Berlinia (Berlinia spp.) is a West African hardwood sold in the US as Ebiara or Red Zebrawood. It's a fairly new arrival on the US market, and a moderately priced one.The heartwood ranges from pale yellow to, more typically, a muted reddish-brown, with darker stripes that can be regular or irregular. That's where the comparison with Zebrawood comes from, and the two are in fact related.The grain is straight or interlocked and the texture medium to coarse, with good natural luster and occasional figure and chatoyance. It cuts, turns, glues and finishes smoothly, though interlocked boards can tear out, so take light final passes.Berlinia suits furniture, cabinetry, turnings, veneer and specialty items, and luthiers and turners are starting to take an interest in it.
cabinetry, furniture, specialty items, turnings, veneer
Flame Birch isn't a separate species. It's Yellow Birch (Betula alleghaniensis) with a bold, wavy flamed figure running across the grain.The heartwood ranges from pale yellow to a light reddish-brown, with grayish-white sapwood. The best boards show wide, dramatic curl, similar to figured Cherry, that shimmers under a clear finish.It works easily and turns, glues and finishes well, though most boards have little natural luster until finished. It isn't durable outdoors, so keep it protected.Flame Birch is a favorite for boxes, turnings, crafts and specialty pieces where the figure can take center stage, and the best logs go to veneer. For a darker, more stable version, see Roasted Flame Birch.
boxmaking, crafting, specialty items, turnings, veneer
cabinetry, construction, flooring, furniture, gun stocks, joinery, veneer
Boxwood (Buxus macowanii), also known as Cape Boxwood or East London Boxwood, is native to the Eastern Cape of South Africa. It's a close cousin of the original European boxwood (Buxus sempervirens) and shares its most prized quality: a dense, ultra-fine texture that holds the crispest detail.The wood is a pale, creamy yellow with almost no visible grain, so nothing competes with the carving or turning itself. It cuts cleanly with sharp tools, turns superbly and finishes to a smooth, silky sheen without much more than fine sanding and a light oil or wax.The trees are small, rarely more than 20 feet tall with trunks of about 6 inches, and the dense wood is prone to cracking as it dries. That limits supply to small, craft-sized pieces. Ours comes from South Africa and has been slowly air-dried over many years for stability. Be wary of other pale, dense woods sold as boxwood.Boxwood has long been the wood of choice for fine carving, engraving blocks, chess pieces, rulers and instrument parts, and it's a favorite with turners for small, detailed work. For a more affordable alternative, see Castello Boxwood.
carving, chess pieces, handles, musical Instruments, specialty items, turnings